Pineboards
HatDrive! Nano (NVMe 2230, 2242 GEN 3) for Raspberry Pi 5
HatDrive! Nano (NVMe 2230, 2242 GEN 3) for Raspberry Pi 5
Couldn't load pickup availability
Share
Looking for a Raspberry Pi 5 M.2 HAT that fits within your official case? So were we! That’s why we worked on the Pineboards HatDrive! Nano so that you don’t have to leave your poor Pi exposed to the world.
Supporting both M.2 2230 and M.2 2242 form factor devices with an M-Key connection, you can install an NVMe SSD and enjoy the much faster storage over the Raspberry Pi’s PCIe Gen 2/3 connection or go nuts and install that crazy M.2 adaptor board you just found in the depths of the internet.
One of the best things about the tiny footprint of the Nano is that the fan on the Active Cooler is unobstructed and can pull in all the air it needs to keep things under control. If you need your GPIO headers, don’t fret, these are also freely accessible!
Each HatDrive! Nano comes with one of our impedance controlled, itty bitty 25mm PCIe FPC (Flexible Printed Circuit) Cable to connect to your Single Board Computer and all the screws needed to either assemble the HAT in the official case, or out of it.
Quick Facts
- Incredibly small footprint: At its widest points it measures just 55x34mm!
- Official case compatibility: Why compromise? Utilize the lid of your case to keep everything safe.
- Wide-ranging device support: With both 2230 & 2242 M-Key M.2 devices supported, possibilities are endless. The presence of SUSCLK improves NVMe drive compatibility too!
- No half measures: Whilst small in stature, we didn’t cop out on components. For example, a quality 3A buck converter. Higher efficiency, less heat!
- High quality accessories: The included impedance controlled PCIe cable ensures a consistent, and quality connection to your Raspberry Pi 5, even at Gen 3 speeds! That, and all our screws/spacers are metal for that premium feel.
- Great value: When we say Nano, we mean both in size and impact on your wallet!
